Product Features
1. Strong adhesion, it can be used to most of paper on the market to make blister packing, including some non blister paper. Truly solving the problem of PET not being firmly absorbed on various types of blister paper, and compatible with the excellent blister packing function on PVC materials; Quick drying without sticking flowers, solving the problem of long paper cooling time during customer use; Industry challenges such as automatic die-cutting and adhesive board.
2. This product has superior leveling properties and is non-toxic and odorless when baked or polished; Water based products, environmentally friendly vacuum formed oil, do not cause environmental pollution or harm to ecology, humans, and livestock; It can be designated as a specialized product by some well-known domestic and foreign brands through food and toy hygiene testing standards.
3. Efficient and rapid drying, short paper cooling time, greatly improving production efficiency.
 |
Appearance |
White Liquid |
| Viscosity |
35 S ±2 |
| Solid content |
42 ±1)% |
| Diluent |
Water& Ethanol |
| Date of use |
6 months |
| Coating method |
On-line and off-line roller coating |
| Drying conditions |
Infrared lamp or high temperature drying |
| Packing |
25KG/50KG/125KG
|
Use method:
1. Dilute this product with tap water or ethanol in a ratio,
Blister varnish 100: water or ethanol 10-20
2. If the concentration increases during use, please replenish water in a timely manner
3. The coating amount varies depending on the paper, and it is recommended to use 4-8g/m2
4. The temperature for vacuum forming varies depending on the shell, and it is recommended to be above 150 ºC for 5-8 seconds. If encountering PVC shells, the temperature should be appropriately lowered
Notes:
1.The coating amount should be based on the principle of meeting the requirements of the paper.
2.If certain inks come into conflict with this product, please stop using and contact our company.
3. The dilution ratio of tap water should not be too high, otherwise it will result in poor ink removal and vacuum forming effect of the product. The dilution ratio should also not be too low, otherwise it will cause paper sticking phenomenon.
4. After the paper is coated and dried, please place it vertically. After it is completely dried, place it flat. It is recommended to store and transport the paper vertically after coating and drying.
5. The vacuum forming process is the last step in the printing process. Due to various variables during the printing process, such as changes in paper, bubble shell, baking temperature, transportation conditions, and final vacuum forming temperature, it is recommended to make small samples for different batches before mass production. Otherwise, our company will not bear any responsibility.
Safety precautions:
1. This product is non-toxic and non irritating. If it comes into contact with the skin, it should be rinsed with clean water in a timely manner.
2. Do not enter and avoid direct contact with the skin. If it splashes into the eyes, please rinse with sufficient water in a timely manner.
3. After stopping the machine, please clean it immediately
effect picture
Audited Supplier 
){kind=link}